Material Data Sheet

Please select a material application among SM series and proprietary grades.

New Sour Service - SM-80XS

Coupling: Red, Blue
Pipe body: Red, Blue
General description

SM-80XS is a low alloy Carbon steel OCTG material suitable for severe Sour Service applications. SM-80XS is a Sulfide Stress Cracking (SSC) resistant material.

SSC failure mechanism is a form of Hydrogen embrittlement in combined presence of H2S, water and tensile stresses. SM80XS benefits from Nippon Steel’s unrivaled know-how in manufacturing sour service materials since the 70’s and best-in-class quality control. SM-80XS offers a tighter quality control compared to API L80 and is manufactured based on API 5CT/ISO 11960 PSL2 requirements.

Diameters: 2-3/8” to 16”

Weights: as per API 5CT/ISO 11960

Special application: Please contact Nippon Steel engineer, should You require specific size, weight, drift, or any other characterization.

Reference document
  • Proprietary SM-XS  series.TGP-    (latest revision)
  • API 5CT / ISO 11960
  • NACE MR0175 / ISO 15156-2
  • API 5C1 / ISO 10405
  • NACE TM0177
  • VAM Book
Manufacturing
PROCESS DESCRIPTION
Steel making Ladle refined, fully killed and vacuum degassed; continuously cast to a fine grained practice
Pipe making Seamless
Heat treatment Quenched and Tempered
Specified mechanical properties
YIELD STRENGTH
KSI		 TENSILE STRENGTH
KSI		 ELONGATION
%		 HARDNESS
HRC		 TECHNICAL NOTE
Min Max Min Min  Max  
80 95 95 API Formula 22.0 Application: Unlimitted H2S
Tested: 90% SMYS, 1bar H2S, NACE A, Sol-A
Physical and thermal properties
  UNIT 25°C 50°C 100°C 150°C 200°C 250°C
Density Kg/m3 7800 7790 7780 7760 7750 7730
Young's modulus GPa 213 211 209 206 203 200
Poisson's Ratio - 0.30 0.29 0.29 0.29 0.29 0.28
Tensile strength de-rating % 100 98.3 95.5 94.4 94.7 94.7
Yield strength de-rating % 100 99.3 96.4 91.7 90.3 88.2
Thermal Diffusivity x10-6 m2/s 12.3 12.3 11.9 11.3 10.6 9.96
Heat Capacity x106 J/m3 deg.C 3.61 3.79 3.83 3.97 4.15 4.34
Thermal Conductivity W/m deg.C 44.4 46.7 45.6 44.8 44.0 43.3
Specific Heat J/Kg deg.C 463 487 492 511 535 562
Thermal expansion x10-6 / deg.C - 12.5 12.4 12.6 12.8 13.0
Yield strength / Temperature

 

Technical information

While the increase of temperature minimizes SSC susceptibility as outlined in Figure 2, SM80XS remains SSC resistant at all temperatures.

Dependency of SSC susceptibility on test temperature.

Fig. 2 : Dependency of SSC susceptibility on test temperature.
modified 4130 material,σappl=100%AYS, pH2S=100kPa at 25 deg.C, NACE Method A, solution A.
[Ref : R.D.Kane et,.al.J.Petroleum Technology, 1483(1977)]

In addition, Figures 2 features the major sensitivity of SSC resistance to the material strength : SSC susceptibility increases along with material Yield strength. On that regards, SM80XS preserves its SSC resistance across the full range of its specified Yield strength range, as shown in Figure 3.

H2S partial pressure versus materials SSC behavior.

Fig. 3 : H2S partial pressure versus materials SSC behavior.
modified 4130 material, σappl=100%AYS, 4PB, solution A, 25 deg.C.

While NACE TM0177 has standardized its testing environment to 100kPa H2S, Nippon Steel has explored SSC susceptibility at higher H2S partial pressure, as illustrated in Figure 3, in order to assess the robustness of its material designs and processes. SM-80XS was successfully tested up to 1000 kPa or 10 bar H2S, and is to be considered full fledge Sour Service.

For additional information about material performances please contact Nippon Steel engineers.

Case history from the field

A selection of critical applications of Nippon Steel's Sour Service proprietary grades shows the extensive record in region 3. These Field records include former SM-80S, SM-90S and SM-95S used as intermediate,  production casing and tubing. More detailed well conditions are provided below along with the specified material :

SM80S 90S 95S applications

 

Storage and handling procedure

Health, Safety and Environment

While state-of-the-art HSE rules are applied throughout Nippon Steel manufacturing process, proprietary and specific HSE regulations shall be applied along the life cycle of the pipe until it reaches its final position in the well, according to each operator’s rules. This particularly applies to all phases of handling and transportation, assembly on the rig floor, and rig return if applicable. OCTG are heavy and by nature unstable. Special care shall be paid to potential risks of injury whenever handling OCTGs. Walking on pipes shall be avoided at all times. Usage of Personal Protection Equipments (PPE) is mandatory. Equipment and procedures will be established to capture the possible wastes generated during maintenance (cleaning, coating, doping) and disposed according to local regulations. This applies in particular to storage dope, running dope, or cleaning water wastes.

Best practices for transportation, handling and storage of OCTG in general are covered by ISO 10405 / API RP5C1. VAM Book is also a good source of handling practices for VAM connections. In addition to these general rules, specific care is recommended pertaining to SM-XS series, because improper handling could affect the material performances and by extension the corrosion resistance :

  • Prevention of Spot Hardening

For more specific information please contact Nippon Steel engineers